橡胶O型圈密封防水圈定制沟通
When using rubber O-rings for sealing applications, verify the inner diameter, cross-section, and assembly clearance. You may refer to standard specifications or non-standard drawings to discuss material, dimensions, and sample verification requirements.
Please Prepare Before the Evaluation
标准或非标规格、内径与截面、装配间隙及密封条件。请同时提供2D/3D图纸或样品、预计数量与目标交期。
Samples and Acceptance
Material grades, dimensional tolerances, tooling costs, minimum order quantities, and lead times must be evaluated based on specific requirements. The images shown are for reference only; for any requirements regarding heat resistance, water resistance, food contact, or other performance characteristics, the conditions of use and acceptance criteria must be clearly specified and verified through testing of samples or finished products.
Submit your drawings to receive a customized solution
Please provide the product's intended use, 2D/3D drawings or samples, key dimensions, material requirements, and estimated quantity. Drawings may be sent as email attachments.
Send Your Inquiry Send the drawings via email
Materials, minimum order quantities, tooling costs, and lead times must be evaluated based on the specific drawings and quantities.
Product Selection and Sample Acceptance
- The inner diameter, cross-sectional area, grooves, and assembly compression must be verified to ensure compatibility; for non-standard rings, the rotation angle and positioning structure must be confirmed separately.
- The medium, temperature, and contact cycle determine the scope of the rubber compound evaluation, and final acceptance is based on assembly and leak testing of the prototype.
Production specifications, performance, and delivery terms shall be governed by the drawings, samples, and inspection requirements confirmed by both parties.
