Pressure Hold Versus Pressure Cycling for Static Seals
A pressure hold examines a stable state; cycling examines changes after repeated loading. Neither replaces the other. Keep intermediate che…
Read the article →Chengxin Silicone Rubber · Engineering and application insights
Silicone Rubber Knowledge
Explore articles on material selection, structural design and sample acceptance to help address your product questions.
Browse by engineering question
Read the technical guidance, or discuss your drawings and operating conditions with us.
Submit Customization Request →
Seal Lubrication: Assembly Force, Compatibility and Contamination
Choose lubrication around compatibility, assembly needs and cleanliness. More grease is not inherently safer; excess can migrate and affect…
Read the article →
Locating Tabs on Shaped Gaskets: Positioning Versus Load Carrying
Locating tabs establish orientation. Drawings should state whether they may carry tension, shear or clamp load. Using a small tab as a hand…
Read the article →
When to Measure Silicone Rings After Stretching and Assembly
Standardize the measurement state after stretching, compression or transport restraint. Readings immediately after unpacking, installation …
Read the article →
Window Leaks: Checking the Lens, Housing and Fastening Paths
Window assemblies have multiple possible paths, including lens edges, mounting holes and the seal frame. Water visible inside a lens does n…
Read the article →
Bulging Corners on Silicone Seal Frames: Radius and Assembly Checks
Check the frame's free shape, gland corners and insertion sequence together. Forcing a bulge flat can conceal accumulated material and crea…
Read the article →
Seal-Surface Scratches: Direction and Contact-Band Location
Record defect direction, depth and location together. A groove crossing the contact band and a scratch outside it should not receive the sa…
Read the article →
Locating Leaks in Multiport Assemblies: Fixture Baseline First
Distinguish product interfaces from the test system before isolating paths. Temporary blocking should narrow the investigation without dist…
Read the article →
Water-Test Pass, Air-Test Fail: Understanding Seal Test Boundaries
Water and air tests can differ in the phenomenon observed, medium and sensitivity. Conflicting results do not immediately prove an instrume…
Read the article →
Reusing Removed Silicone Seals: Maintenance Evidence to Check
Reuse decisions should combine maintenance rules, service history and removal inspections. An intact appearance does not replace evaluating…
Read the article →