Unclear Laser-Etched Silicone Key Legends: Coating and Contrast
Legend clarity depends on base color, coating, processing and viewing conditions. Define daylight reading or backlit display before approvi…
Read the article →Chengxin Silicone Rubber · Engineering and application insights
Silicone Rubber Knowledge
Explore articles on material selection, structural design and sample acceptance to help address your product questions.
Browse by engineering question
Read the technical guidance, or discuss your drawings and operating conditions with us.
Submit Customization Request →
Button Rattle Versus Binding: Clearance, Guidance and Friction
Too much clearance can rattle; too little can bind. Visible zero gap is not the objective. Establish a working window using tolerances, til…
Read the article →
Silicone Button Overtravel: Actuation and Protective Stops
Define what carries the load after a button actuates. Separate actuation position, permitted overtravel and protective stop so the PCB or c…
Read the article →
Multiple Events from One Key Press: Contact Bounce and Debouncing
Keep mechanical motion, electrical contact and system sampling evidence together when one operation creates multiple events. Contact bounce…
Read the article →
Conductive Silicone Key Contact Resistance: Pressure and Electrodes
Record contact resistance with pressure, electrodes and method. Light touch, rated press and overload can produce different values; do not …
Read the article →
Silicone Keypad Snap Ratio: Aligning Peak and Valley Definitions
Agree the curve segment and peak/valley selection before comparing snap ratio. Percentages based on different definitions or speeds should …
Read the article →
Slow Silicone Key Return: Trapped Air or Web Recovery?
Slow return may involve cavity airflow as well as material and geometry. Map where air moves during pressing and release, then use controll…
Read the article →
Packing Silicone and Rubber Parts Together: Transfer and Mix-Up Risks
Assess mixed packaging before combining different materials, colors or surface treatments. Besides identification errors, check contact mar…
Read the article →
Silicone TDS Temperature Ranges Versus Continuous Service
Interpret TDS temperature information with its test conditions and intended use. A range endpoint is not a finished-part continuous-service…
Read the article →
Water at Silicone Foam Edges: Cells, Cut Faces and Compression
Assess edge liquid uptake or leakage against cell structure, cutting and compression. Water resistance at a sheet surface may not cover fre…
Read the article →