Chengxin Silicone Rubber · Engineering and application insights

Silicone Rubber Knowledge

Explore articles on material selection, structural design and sample acceptance to help address your product questions.

Browse by engineering question

Read the technical guidance, or discuss your drawings and operating conditions with us.

Materials and Environmental Validation2026-10-12

Low-Temperature Silicone Data: TR10, DSC Tg and Cold Starts

TR10 and DSC glass-transition temperature Tg describe different phenomena. They are not interchangeable or standalone minimum service tempe…

Materials and Environmental Validation2026-10-12

Dielectric strength, volume resistivity and finished-assembly voltage withstand are different properties. They address breakdown, conductio…

Sealing Design and Assembly2026-10-12

Detecting gas does not necessarily mean a silicone ring is cut. Gas may travel through assembly paths or permeate the polymer; vacuum syste…

Grommets, Cushioning and Vibration2026-10-12

Fold durability depends on more than tear strength. Review fold path, thin-to-thick transitions, local stretch, demolding damage and temper…

Molding, Tooling and Finishing2026-10-12

Report force, specimen width, peel conditions and failure location together. One maximum force poorly compares different structures. Separa…

Molding, Tooling and Finishing2026-10-12

Start a molding design of experiments with a clear question: which controlled factors affect which measurable results? Define safe feasible…

Molding, Tooling and Finishing2026-10-12

Follow the exact grade and supplier instructions for liquid silicone rubber A/B metering. Distinguish mass ratio, volume ratio and the equi…

Molding, Tooling and Finishing2026-10-12

A curemeter curve compares a compound's cure response under defined conditions. Interpret ML, MH and t90 with the instrument, temperature a…

Sealing Design and Assembly2026-10-12

Nominal dimensions alone do not establish seal squeeze. For a simplified axial seal, check the thinnest seal with the largest closed gap an…

Sealing Design and Assembly2026-10-12

Do not judge immersed silicone only by whether it dissolves. Compare volume, mass, hardness, appearance and assembly function, separating i…